Pool Fencing
Melbourne
Frameless glass, semi-frameless and aluminium pool fencing built to Victoria's pool-safety rules, with the certificate of compliance lodged on every job.
A pool fence is the part you can see. A compliant barrier is the part that gets signed off.
Most quotes sell you glass and leave the compliance risk sitting with you. In Victoria a pool barrier is not finished when the glass goes in. It is finished when a registered inspector signs a Certificate of Barrier Compliance and you lodge it with your council. We build for that outcome first, then we sell you the fence.
What each barrier material does to each rule
Tap through each requirement to see it on the barrier, then tick the ones your pool already meets. This is the sequence a registered inspector follows, offered as general guidance.
The barrier must measure at least 1200mm from the finished ground or paving to the top of the fence. Every low point around the pool is measured, so a garden bed or retaining wall can quietly drop you under.
Guidance only, current at time of writing. The Victorian Building Authority function is moving to the Building and Plumbing Commission. Confirm the current requirements and the standard that applies to your pool with your council and a registered inspector.
Every option below meets the standard. The difference is the look.
Now showing: Frameless glassFrameless glass
12mm toughened glass held by discreet stainless spigots, no posts and no top rail. The clearest, most open look, and the one buyers ask for by name.
Build a live estimate, no email required
Configure your barrier to see what a complete install includes. The certificate of compliance and gate hardware are part of every job. We give you a firm, itemised price at your free on-site measure.
The numbers behind a compliant barrier
Every barrier is engineered to AS 1926.1-2012 and installed with marine-grade hardware. This is the drawing an inspector reads.
Dimensions and clearances
Materials
Gate and standard
Whichever barrier you choose, it runs on the same cycle
Under the Victorian Building Regulations 2018, a pool or spa that can hold water 300mm deep or more is on a compliance cycle, not a one-time sign-off. This is the general shape of it, current at time of writing.
Register
Register your pool or spa barrier with your local council, a legal requirement for every Victorian pool.
Certify
A registered inspector assesses the barrier against AS 1926.1 and, if it passes, issues a Certificate of Barrier Compliance.
Lodge in 30 days
The certificate is typically lodged with council within 30 days of the inspection so your barrier is on record.
Re-certify
Barriers are typically re-inspected and re-certified on a four-year cycle. We flag when yours is due.
General guidance, not legal advice. Timeframes and the applicable standard depend on your pool and your council. Confirm the current process with your council and a registered inspector before you rely on any date here.
Pool Fence Installation Process
Site Survey & Compliance Assessment
We measure the pool area, identify all points of entry, check for climbable objects in the NCZ, and design a fully compliant barrier layout.
Council/Surveyor Liaison
We liaise with your building surveyor or council to confirm the compliance approach before any work begins.
Core Drilling & Spigot Setting
Spigot positions core-drilled and set with structural epoxy. Channel bases installed where required.
Glass Panel Installation
Toughened safety glass panels installed, levelled, and secured. Gate frames hung and adjusted for self-close and self-latch.
Inspection & Certificate
Completed barrier inspected by our VBA-registered inspector. Certificate of compliance issued.
Why Choose Us For Pool Fencing
Compliance guaranteed. We handle the certificate process end to end.
VBA Registered
All pool fencing installation supervised by VBA-registered building practitioners.
Certificate Included
Certificate of compliance included in every pool fence installation quote.
First-Time Pass
We design for compliance before installation begins, not after, so barriers pass inspection the first time.
Liability Coverage
Public liability insurance held, with all compliance work documented in writing.
Pool fencing, answered
Straight answers on cost, compliance and the parts of the process people worry about most.
Still have questions? Call usYes. Under the Building Act 1993 (Vic), all swimming pools and spas capable of holding water 300mm deep must be surrounded by a compliant safety barrier. Fines apply for non-compliance.
Pool fencing across Melbourne
Inner Melbourne
Known for courtyard and plunge pools, where an aluminium run on the boundary and glass on the view side is the usual split.
Ready for a certifiable
pool barrier?
Free measure · same-day quote · certificate of compliance handled end to end.